أكسيد الإيثيلين (منظمة أصحاب العمل) Sterilization Glossary
Understanding the technical terminology is essential for maintaining compliance with FDA and ISO 11135 المعايير. Below is an alphabetical guide to terms frequently used in أكسيد الإيثيلين (منظمة أصحاب العمل) تعقيم discussions among medical device manufacturers.
The process of removing EO الغازية from a sterilized product by exposing it to air to reduce residual EO levels.
The number and type of microorganisms present on a product prior to the EO sterilization process.
The sealed vacuum container where the عملية التعقيم takes place under controlled parameters.
A colorless gas used as a potent معقم due to its ability to penetrate packaging and reach complex device areas.
The movement of EO الغازية molecules from areas of high concentration to areas of low concentration within the load.
The measured ability of the عملية التعقيم to effectively kill specific microorganisms.
Preparing a product by exposing it to controlled humidity and temperature prior to EO gas injection.
The documented process of verifying that the sterilization cycle consistently achieves the desired sterility level.
Critical Technical Metrics: D-Value
في Ethylene Oxide sterilization technology, ال D-value is one of the most vital metrics for quality control. It represents the specific time required to achieve a one-log (90%) reduction in the number of viable microorganisms at a set temperature and gas concentration.
بوكون: Your Expert in EO Sterilization Compliance
بوكون معقمات ETO من سلسلة BCS are designed to meet all FDA sterilization و ايزو 11135 requirements. Our equipment provides precise control over gas concentration, exposure time, و aeration, ensuring your products achieve the highest standards of safety and low residual EO levels.
