Group 1(1).png

导航栏

公司信息

公司介绍

click to view the <a href="https://www.hzbocon.com/products/precondition-room-and-aeration-room">Preheating Room &amp; Aeration Room detail</a>
<h2 class="MsoNormal">&nbsp;</h2>
<h2 class="MsoNormal">1、Building&nbsp;requirements:</h2>
The space height of the workshop is 5 meters, and the size of the entrance door of the workshop is not less than 3 meters wide and 3.5 meters high. The factory should take good ventilation measures, good lighting and emergency lighting, all electrical appliances adopt explosion-proof grade (&nbsp;There is a de-dusting and disinfecting device for the import and export of personnel, and a disinfecting filter device for the import and export of&nbsp;goods).
<h2 class="MsoNormal">2、Requirements for ground floor</h2>
The ground needs to be flat and can bear 2t/㎡,&nbsp;concrete pouring, with shop floor paint, and have a dedicated security channel and&nbsp;identity.
<h2 class="MsoNormal">3、Environmental requirements:</h2>
Environmental requirements:&nbsp;5℃~40℃; relative humidity: &le;85%RH. Atmospheric pressure：90~105kPa。
<h2 class="MsoNormal">4、Power requirements </h2>
Preheating room total power 50kw/ room, 380V\50Hz, three-phase five-wire system; Aeration&nbsp;room total power 10kw/ room, 380V\50Hz, three-phase five-wire
<h2 class="MsoNormal">5、Water requirements</h2>
Heating water: pure water pipeline DN25, water pressure greater than 2kg, with valves and pressure gauges; Humidifying water: pure water pipeline DN15, water pressure more than 2kg, with valves and pressure&nbsp;gauges.
<h2 class="MsoNormal">6、Steam requirements</h2>
filter, remove water, and adjust the pressure to 4kg, with valve and pressure gauge
<h2 class="MsoNormal">7、Gas requirements</h2>
Compressed air without water or oil, pressure 4-6kg, filter with&nbsp;pressure control valves and pressure&nbsp;gauges
<h2 class="MsoNormal">8、Lifting requirements</h2>
Our&nbsp;factory will handle the transportation to the buyer, and the transportation company will contact the customer directly by telephone on the&nbsp;spot; Hoisting and unloading to the designated area after the customer's acceptance of the non-destructive appearance, and then waiting for the supplier commissioner to be present for&nbsp;installation, note:&nbsp;customers should prepare hoisting, fork unloading tools and personnel in advance.
<h2 class="MsoNormal">9、Requirements for exhaust and drainage</h2>
The lower part of the room and the control room shall be provided with a water outlet nearby&nbsp;in order&nbsp;to discharge the condensate of the preheated room regularly.
<h2 class="MsoNormal">10、Layout requirements</h2>
The area to be sterilized must be completely isolated from the sterilized area and marked conspicuously, the logistics direction should be clear that the unsterilized products and sterilized products are completely isolated and cannot be mixed. The used sterilized area shall be physically isolated from the cold analytical area of the plant (if has one) with walls high enough for physical isolation. &nbsp;Isolate the pending release area from the released area. The goods storage space (greater than or equal to the capacity of the aeration&nbsp;room) for at least 3 working days should be reserved in the release area. Products must not be placed directly on the ground, using stack board&nbsp;storage. &nbsp;
<h2 class="MsoNormal">11、 Customers&nbsp;need to prepare in advance:</h2>
<div align="center">
<table class="MsoNormalTable" border="1" cellspacing="0">
<tbody>
<tr>
<td valign="center" width="144">
name
</td>
<td valign="center" width="232">
Material, specification
</td>
<td valign="center" width="144">
Requirement
</td>
<td valign="center" width="104">
Note
</td>
</tr>
<tr>
<td valign="center" width="144">
Pure water pipe
</td>
<td valign="center" width="232">
304
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Compressed air
</td>
<td valign="center" width="232">
Zinc plating
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Water pipe
</td>
<td valign="center" width="232">
Zinc plated/PPR
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Crane span structure, hanging brace
</td>
<td valign="center" width="232">
Galvanized thicker type 400X100, hanger 40 national standard Angle steel, 10mm hanger&nbsp;rod
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Sewer pipe
</td>
<td valign="center" width="232">
Zinc plated/PPR
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Grounding device
</td>
<td valign="center" width="232">
Zinc plating
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
<tr>
<td valign="center" width="144">
Power
</td>
<td valign="center" width="232">
Meet power requirement
</td>
<td valign="center" width="144">
Connect to the device interface
</td>
<td valign="center" width="104">
&nbsp;
</td>
</tr>
</tbody>
</table>
&nbsp;
</div>

Preheating Room& Aeration Room Install Request For 20m3 Eto Sterilizer

Publish Time：2023-10-19